Explore Our Projects

Structure & MEP Design, Saint Augustine FL 

S3DA Design is providing Structural and MEP engineering services for a three-story mixed-use apartment building in Saint Augustine, Florida. The project includes basement parking, ground-level office/common areas, and 14 apartment […]

Learn More

Mixed-Use Development in Los Angeles, CA 

This seven-story mixed-use development in Los Angeles replaces an existing residential and commercial site with a modern structure featuring 40 apartment units, 1,350 SF of retail space, and podium parking […]

Learn More

MEP Design for a Fourplex in Jacksonville, FL 

S3DA Design provided comprehensive MEP engineering services for a new fourplex residential development in Jacksonville, Florida. This multifamily project required efficient, code-compliant systems to support modern living across multiple dwelling units.  S3DA’s Scope  Key […]

Learn More

MEP design for First Wave Apartments, Santa Cruz, CA  

S3DA delivered a comprehensive MEP engineering solution for the First Wave Apartments, a new multi-family residential development in Santa Cruz. Our team focused on creating robust, energy-efficient systems that balance […]

Learn More

Plumbing Engineering Design – 6-Unit Multifamily Residential Building Detroit, Michigan

Our team provided comprehensive plumbing engineering design services for a new 6-unit multifamily residential apartment building in Detroit, Michigan. The scope of work was carefully coordinated with architectural, structural, and mechanical systems […]

Learn More

Structural, MEP, Fire Sprinkler and Photometric studies design for Adams Ave. Apartment San Diego, CA 

S3DA Design is delivering full Structural, MEP, Fire Protection, and Photometric engineering for this multi-level development. Our structural scope includes complete loading analysis and detailed framing, shear wall, and foundation plans. MEP […]

Learn More

MEP Engineering Services for Duplex and 7-unit townhomes, Colonial Parkway, Katy, TX 

S3DA Design delivered full Mechanical, Electrical, and Plumbing (MEP) engineering services for the project at Colonial Parkway in Katy, Texas. Our scope included HVAC system design with heat-load calculations, mechanical floor […]

Learn More

Structural and MEP design for a Mixed-Use Building, San Diego, CA 

S3DA Design has been entrusted with providing full Structural and MEP engineering design for the new Kettner Mixed-Use Building in San Diego, California. This development combines residential and commercial functions in a modern urban […]

Learn More

MEP Design for a New 6-Story Multi-Family Building, San Diego, CA 

S3DA Design was selected to provide comprehensive MEP (Mechanical, Electrical, and Plumbing) engineering design for a new 6-story multi-family residential development in San Diego, California.  The MEP design covers complete building systems, including:  The S3DA team […]

Learn More

MEP design for multi-family building, San Diego, CA

S3DA Design has been selected to provide comprehensive MEP engineering services for a new multi-family residential project in San Diego, California.Our scope includes complete mechanical, electrical, and plumbing systems to […]

Learn More

MEP design for a New Multi-Family Building, Newark, New Jersey

Our team is providing full Mechanical, Electrical, and Plumbing (MEP) engineering design for a new multi-family residential building in Newark, New Jersey. Scope of Work: Mechanical: Complete HVAC design, including […]

Learn More

MEP design for  Mixed-Use Residential, Redding, CA 

S3DA Design has been awarded the MEP engineering package for a new mixed-use residential development in Redding, California.   Our scope includes full Mechanical, Electrical, and Plumbing (MEP) design to ensure […]

Learn More

MEP Design, Liberty Rock Senior Multi-Family Housing and Office Building, Sacramento, CA  

Liberty Rock Senior Housing & Office Building, Sacramento, CA As part of the Liberty Rock development at 5132 Elkhorn Blvd in Sacramento, CA, we completed the full electrical design for both […]

Learn More

Structural and MEP design for Lofts Apartments, Salt Lake City, UT

S3DA is providing Structural and MEP design services for the Lofts Apartments in Salt Lake City, UT. The scope includes foundation, podium, and wood framing design for six levels, with […]

Learn More

Crossroads West Apartments, Riverbank, CA

S3DA Design is providing MEP design engineering services for the Crossroads West Apartments in Riverbank, CA. At S3DA Design, we’re committed to creating efficient, sustainable, and code-compliant designs for multifamily […]

Learn More

3-Story Multi-Family Building in La Mesa, CA

S3DA was awarded the Structural and MEP design project for a 3-story multi-family building located at 7285 University Ave., La Mesa. This project demonstrates our comprehensive approach to design, offering […]

Learn More

Multifamily Building in Elizabeth, New Jersey

S3DA Design provided comprehensive Structural and MEP design services for a multifamily building in Elizabeth, NJ. The scope included designing the foundation, 2nd-floor podium to support upper levels and resist […]

Learn More

East Lake Village Condos, Port St. Lucie, FL

S3DA Design was awarded for providing MEP and Structural design for 136,000 sq. ft. mixed-use condominium complex, in addition to site lighting and photometric plan. Design Challenges: The East Lake […]

Learn More

Multi-Family 6-Plex Building, San Diego, CA

S3DA was awarded a project in San Diego to provide full structural design services for a 6-plex. The scope includes foundation design, steel framing analysis for seismic and gravity loads, […]

Learn More

Multi-Family 12-Plex Building, San Diego, CA

S3DA was awarded a project in San Diego to provide comprehensive structural design services for a 12-plex. The scope includes foundation design, steel framing analysis for gravity and seismic loads, […]

Learn More

Structural Design for a mixed-use apartment building, Fontana, CA

S3DA Design was awarded a new mixed-use development project that combines modern design with innovative engineering solutions. The project is located at 13381 Foothill Blvd, Fontana, CA

Learn More

Structural and MEP design for Club House, Fort Myers, FL

Structural and MEP design for Meridian Homes, Main House and Maintenance Building, Fort Myers, FL S3DA will provide full structural, electrical, HVAC, and plumbing design. Our structural scope includes foundation […]

Learn More

Structural and MEP design for 36 Unit Apartments in San Diego, CA

Structural and MEP design for 36 Unit Apartments at 305-309 S Willie James, San Diego, CA S3DA has been awarded a project consisting of structural calculations and drawings for four [...]
Learn More

Structural and MEP design for 3 story Restaurant, office, and residential building – Newark, NJ

Construction Documents Structural and MEP design for 3 story Restaurant, office, and residential building at 77 Bloomfield Ave, Newark, NJ S3DA Design has been awarded an MEP design project for [...]
Learn More

MEP Design for IDAHO MICRO UNITS, San Diego, CA

S3DA completed the MEP Design for IDAHO MICRO UNITS at 4215 Idaho St., San Diego, CA 92104. The project was a construction of a 3-story, 18 residential dwelling units for [...]
Learn More

MEP Design for 12 Unit Apartment, Baldwin Park, CA

S3DA finished the MEP Design for 12 Unit Apartment at 12779 Torch St., Baldwin Park, CA 91706, and went for city approval in December 2022. The project is Mechanical, Plumbing, [...]
Learn More

Structural & MEP Design for Yacht Club Villas Apartments – Condo Phase, San Diego, CA

S3DA is providing comprehensive Structural and MEP design services for the retrofit of Yacht Club Villas Apartments at 2828 Upshur St., San Diego, CA. This project includes upgrades to the […]

Learn More

MEP Design for Fig St. Apartments, Escondido, CA

ESCONDIDO, CA S3DA is presently working on the MEP Design for Fig Street Apt. at 664 N Fig Street, Escondido, CA 92025. The Design is for a new three-story apartment [...]
Learn More

MEP Design for 2-story Apartment And Office Building, La Jolla, CA.

Location: La Jolla, CA Date: June 2022 S3DA Design was tasked to do the providing MEP design and Title 24 for the two-story apartment and office building.
Learn More

Structural and MEP Design for a four-unit Condo, Oceanside, CA

Location: Oceanside CA Date: June 2022 S3DA Design was tasked to do the providing Structural, MEP design and Title 24 of a structure. The Project involved 11,545 square foot four-unit [...]
Learn More

Civil, Structural and MEP Design – Los Angeles, CA

S3DA Design was requested to provide Civil, Structural, MEP Design and Fire Sprinkler design for 1241 N Sycamore Ave, LA, CA residence. The project consisted of : Structural analysis and [...]
Learn More

Structural and MEP design – Detroit, MI

  Location:: Detroit, MI   Style: Structural and MEP design   Date: May. 2021   S3DA Design was requested to provide Structural and MEP design for 225 E EDSEL, Detroit, [...]
Learn More

Structural Design for El Moderna Apartments, Esparto, CA

Location: Esparto, CA 95627 Style: Structural Design Date: May 2021 S3DA was tasked to do the Structural Design of three 8-unit and one 4-unit apartments for El Moderna Apartments, Esparto, [...]
Learn More

Structural Design for a Duplex in Woodland, CA

S3DA is starting on Structural Design for a Duplex at Clover & Locust St. Woodland, CA 95991 The scope of work for the Duplex at Clover & Locust St. is […]

Learn More

MEP Design for Wilkins Apartments in Los Angeles, CA.

  Client: Agar, Inc.   Location: Los Angeles, CA This 10-unit, 5-story project required designs for HVAC systems, power services, lighting, and plumbing. The building area, which also included a [...]
Learn More

Structural and MEP Design for10-unit Multifamily in Redwood City, CA

Maria Rutenburg, an Investor Sales Broker was about to develop a property, building up a 10-unit multifamily building in Redwood City, CA. The multifamily construction is booming in California due [...]
Learn More